F-14
Current Monitor Probe
The F-14 is used to measure currents on 50Hz, 60Hz, and 400Hz powerlines. Primary power currents of 400 amperes (DC – 400Hz) will not alter the transfer impedance. It can be used to measure conducted emissions and investigate low level harmonics.
Log in here to see performance graphs.Product |
Frequency |
dBΩ (nominal) |
ZtΩ (nominal) |
Connector |
Inner Diameter (mm.) |
Outer Diameter (mm.) |
Height (mm.) |
Max Primary Current DC-400Hz |
RF (CW) |
Peak Pulse Current |
Calibration Fixture |
Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 Hz - 500 kHz | -18 | 0.12 | Type-N | 32 | 94 | 64 | 400 | 50 | 500 | FCC-MPCF-1-32/94/64 | Mil Std 461 |